What Jamie Made: How To Reuse Your Green Onions

Remember the bundle of green onions that we used in our Dragon Noodles post? Well let’s just say, those onions are still alive and going strong! Thanks to Kate’s amazing knowledge of food, I now have a little pot of green onions readily available and growing in my tiny apartment kitchen.

Reuse Your Green Onions | Our Sweet Somewhere

If you plan on using green onions for your next dish, be sure to save the roots! You most likely will never have to buy another bundle of green onions for some time. Planting these babies were cheaper than a jar of molasses (seriously). Here’s what you’ll need:

– Recycled newspaper or magazine

– All purpose potting soil (only $1 from the Dollar Tree)

– Ceramic pot (thrifted mine for $0.69)

– Green onion roots

– Shallow dish for water

– Small rocks for better drainage* (found outside or at your local dollar store)

*Optional

Reuse Your Green Onions | Our Sweet Somewhere

Not only is this eco-friendly project super cheap, but it also takes less than five minutes to make!

1. Simply start out by laying out your recycled paper. Then, once you have everything ready, begin placing the rocks at the bottom of your ceramic pot, spreading them evenly to where water can drain or be absorbed through the soil.

2. Next, put just a little soil at the bottom of the pot while also placing your onion’s roots just above it. Pour in a little soil at a time until you reach about 3/4 of the way from the top of your pot, and just enough to help keep your onions in place. Fill in any places that look like they might need more soil filling.

3. Find a shallow dish for water and to place your pot in. Pictured below, you can see that I reused a plastic top from a to-go restaurant bowl.

Reuse Your Green Onions | Our Sweet Somewhere

Reuse Your Green Onions | Our Sweet Somewhere

Reuse Your Green Onions | Our Sweet Somewhere

And voila! You’ve just potted your first reused bunch of green onions. It might help to have a couple little planted pots of green onions at a time, and at different growth stages, so that it’ll be easier for you to snip some for your next dish! I cannot tell you how thrilled I am to have done this not only for our home, but for our environment.

xoxo, Jamie

What She Made: DIY Washi Tape Wine Charms!

All those in favor of confessing that they’re guilty of hoarding washi tape, say aye. 

“Aye!” Indeed, it’s a true statement.  

Washi tape is one of those products that’s just simply amazing. It’s so amazing that you end up realizing at some point about the ridiculous amount of washi tape you’ve collected in your desk drawer; and unfortunately that looks like the case for me (Jamie). But thanks to wine, and my blog BFF Kate, we were able to put good use to this tape! While a few of our friends were on their way over to hang out and play a game of cards, we decided to make some quick DIY wine charms for everyone. 

How to make washi tape wine charms by Our Sweet Somewhere

So many to choose from!

To create these simple wine markers, all you’ll need are an assortment of washi tape, a pair of scissors, thick-tipped permanent markers, and of course, your wine glasses!

Washi Tape Wine Charms l Our Sweet Somewhere

DIY WashiTape Wine Charms l Our Sweet Somewhere

DIY Washi Tape Wine Charms | Our Sweet Somewhere

DIY Washi Tape Wine Charms | Our Sweet Somewhere

This project turned out great, especially since it took us only a few minutes to make and added some pretty patterns and colors to the party! Now, shall we make a toast to washi tape? We think so.

Cheers!

xoxo,

J&K 

 

What She Made: For The Little Ones

What Kate Made:

I have three beautiful nieces all under the age of four in the same household. Both my brother and sister-in-law are both in the military, which means lots of traveling for the entire family. I decided to make something that was easily used while traveling.

Growing up, I loved paper dolls and would play them all the time, so my goal was to try to make a compact travel version of this classic. 

Betsy McCall Paper Doll Printout

Betsy McCall was introduced by McCall’s Magazine in 1951. The first ten years are available for download and print here. Be prepared, because if you are like me and love vintage fashion you will have such a hard time picking out what outfits to print for your dolls! I ended up printing six different issues for my nieces, but that could have easily doubled if I had the time. Looks like I’ll be sending new outfits to them in the future! I picked three dolls, two brunettes and a blond like the girls, and cut them out along with all the outfits. Don’t cut out the folds like you would if you were not making them travel-friendly because we are going to use velcro instead. 

This is a super tedious task, but I did it on a Saturday while watching enriching documentaries. SIKE! I totally binged on CSI reruns. 

Traveling Paper Dolls-2

Once you have all your dolls and outfits cut out it is time to create the backdrop for them. Grab an extra manila file folder from your home office and some extra construction/scrapbook paper. Make one side of the folder a wardrobe and one side the stage for the dolls. 

Glue everything to the file, including dolls. Trim around so that your scene and wardrobe fit inside. (I chose to leave the dresser off so that I could glue it on later for a pocket.) I then took my file to Staples and got that and the dresser laminated for about seven dollars. 

File Folder Paper Dolls

To save some money, I “laminated” Betsy’s outfits on my own. Using packing tape, I covered the front and backs of the outfits and cut around them. This took some time, but it saved money and again I was able to all kinds of educational documentaries (I secretly love you Mac Taylor!). 

Clothes Fittings

Then I just quartered some 7/8″ sticky back Velcro and stuck the pointy end to Betsy and her friends undergarments (see picture on the right above), and the soft side to her outfits. Easy as pie! 

The girls can take their dolls with them on the go. They fold up easy and can go into their book bags, suitcases, or in the pocket of the backseat of the car.

What do you think? 

 

What Jamie Made:

To be completely honest with y’all, the DIY project that I ended up creating for this weeks’ theme was definitely not what I originally intended on making! Afer a few, or should I say, many tries at creating a pacifier clip (with materials that could not be found in stores), my patience started to grow very thin. In pure frustration, I called Kate to vent about all of the issues that had been going on with my current project. Thanks to her wonderful and creative spirit, she encouraged me to think of something else that I could make with the materials I already had on hand and around the house.

An ‘aha!’ moment happened when I came across some scrap materials in (believe it or not) my boyfriend’s box of crafts! Thus came the idea of creating a simple baby name banner.    

DIY Baby Banner

I used an assortment of scrapped felt pieces, ribbon, and a few pre-made banner flags to make this quick, DIY banner! Other materials that I used to make this involved a pair of scissors, an exacto-knife, and a glue gun. 

Flag Pieces

As you can see, each banner contains three layers of felt: the larger brown circle, the smaller white circle in the middle, and a shape or letter on top. All three of these pieces were glued together and attached to each banner with the glue gun. Next, I took the exacto-knife to create evenly spaced slits for the ribbon to weave through. 

Banner Close Up

The great thing about making banners is how versatile they can be! Even after being knee-deep into making this banner, I kept on thinking about more alternatives to the ribbon (such as hemp string or baker’s twine).  

Baby Name Banner

This project ended up being so much more for me than what it started out with. It’s already been gifted to my sweet nephew, baby Gio! Sooner or later I hope to get some use out of this in a photo shoot with him or when his 1st birthday comes around at the end of this year!

xoxo J&K

Kids Travel Activity-Paper Dolls-Our Sweet Somewhere Blog